Do you know the Application of Ultra-Fine Graphite Rods As Graphite Electrodes?

 As a Graphite Electrodes Manufacturer, share it with you.

Ultrafine graphite is a new type of graphite material developed in the 1970s, mainly used for precision machining electrodes of EDM machine tools.

As an electrode material, it first needs to conduct electricity and heat. In EDM, due to partial discharge, the temperature of the gap between the electrode and the workpiece is 2000-3000°C, so the electrode material needs to withstand high temperatures. If the melting point of the electrode material is low, it cannot be processed quickly with a high current, the processing speed is low, and the processing cost increases. In theory, tungsten or tungsten alloy is the best electrode material. The tungsten electrode has the characteristics of high strength, high density, and melting point close to 3400℃. The actual loss of tungsten electrode in EDM is very small.

Graphite Electrodes

Graphite Electrodes

However, tungsten electrodes have two problems:

1. Tungsten is difficult to process.

2. The price is expensive. Beginning in the 1960s, fine-structure graphite was used as the electrode material for rough machining of EDM machine tools; in the 1960s, metal materials accounted for 80% of the electrode materials used for EDM machine tools, while graphite materials only accounted for 20%.

Compared with copper electrodes, ultra-fine graphite electrodes have obvious advantages.

The first is to increase the speed. The volume of metal etching per hour is called the processing speed. The processing speed of ultra-fine graphite electrodes is 1.5-3 times faster than copper electrodes. Large area can be processed under high current conditions. However, due to the low melting point of the copper electrode, its processing current is limited.

Moreover, the tolerance of the workpiece contour after processing is the processing accuracy, which is closely related to whether the electrode material is wear-resistant. During EDM, there are several kinds of loss of electrode materials; such as volume loss, end loss, side loss and corner loss. Among the four kinds of loss, the corner loss is the largest, and the size of the corner loss determines the service life of the electrode. Since the final machining wheel is determined by the electrode wear at the corners and edges of the electrode, if the weakest part of the electrode can effectively resist the wear, the electrode has the longest life.

The melting point of ultra-fine graphite rods is 2000°C higher than that of copper. The strength of ultra-fine graphite rods is higher than that of copper, and the corner loss during processing is small. This means that ultra-fine graphite has a long service life and processing costs are lower than copper electrode.

Secondly, it can be processed with high precision. 2813 holes with a diameter of 0.02mm can be drilled on a 13×13mm ultrafine graphite rod. The distance between the holes is 0.05mm, and the strength of copper is lower than that of ultrafine graphite. Processing is powerless.

Also, it is easy to process, ultra-fine graphite is made into electrodes, only 1/3-1/5 of copper electrodes.

Finally, the thermal expansion coefficient of ultrafine graphite is only 1/4 of that of copper, so the original design dimensions of the die will not change due to the heating of the electrode during the processing, and the electrode has good dimensional stability.

Our company also has Graphite Electrodes on sale, welcome to contact us.

评论

发表评论

此博客中的热门博文

What are Graphite Electrodes and Needle Coke?

图片
  As a   Graphite Electrodes Manufacturer , share with you. Graphite electrodes are the main heating element used in electric arc furnaces, which is a steelmaking process that melts scrap from old cars or old home appliances to produce new steel. The construction cost of an electric arc furnace is cheaper than that of a traditional blast furnace, which is made of iron ore to make steel and is fueled by coking coal. However, steelmaking costs are higher because they use scrap steel and are driven by electricity. Graphite Electrodes The electrode is a part of the furnace cover and is assembled into a cylinder. Then, the current passes through the electrodes, forming a strong arc, melting the scrap. The size of the electrodes varies greatly, but the diameter can reach 0.75 meters (2 and a half feet), and the longest can reach 2.8 meters (9 feet). The largest weighs more than two metric tons. Up to 3 kilograms (6.6 pounds) of graphite electrodes are required to produce one ton of ...
阅读全文

How to Deal With the Details of Graphite Electrode Use?

图片
  As a   Graphite Electrodes Manufacturer , share with you. We need to know that the wet graphite electrode should be dried before use, and the internal thread of the electrode hole should be checked for integrity. When we clean the surface of the spare graphite electrode and the internal thread of the hole with compressed air, there must be no oily water; avoid cleaning with steel wire or metal brush cloth. Graphite Electrodes It is important to carefully screw the connector into the electrode hole of the spare graphite electrode, and screw the electrode strap (graphite strap is recommended) into the electrode hole on the other end of the spare electrode. When lifting the electrode, the cushion is soft to the bottom of one end of the spare electrode assembly connector to prevent ground damage and connector damage; the lifting hook extends to the lifting ring of the lifting device to lift, the lifting electrode is smooth, preventing the electrode from being released from the B...
阅读全文

Do you know the Bending Strength and Average Particle Size of Graphite Electrode Materials?

图片
  As a   Graphite Electrodes Manufacturer , share it with you. The bending strength of graphite electrode materials and the bending strength of graphite electrode materials are a direct reflection of the strength of the material, reflecting the compactness of the internal structure of the material. Graphite block is a kind of artificial graphite, and artificial graphite is made by artificial heating of coke products. Generally, if it is purified to make high purity, or carbon fiber, the added value is high. Graphite rods are often used as electric heating elements in high-temperature vacuum furnaces. The maximum operating temperature can reach 3000℃. It is easy to oxidize at high temperatures.  Graphite Electrodes Except for vacuum, it can only be used in neutral or reducing atmospheres. Its thermal expansion coefficient is small, thermal conductivity is large, resistivity is (8~13)×10-6 Ω·m, processability is better than SiC, MoSi2 rod, high temperature resistance, extre...
阅读全文